• Digital Six Collaborator Apr 23, 2018

    How to use Garage Floor Seal Kit

    Transform that garage floor quickly and easily. General: Surfaces should be as dry as possible as moisture can affect the penetration of the sealer and possibly lead to a white blooming effect. On concrete, masonry and sand/cement screeds: Often a good sweep is all you need to prepare the surface. If the concrete is new, it must be left for 2 weeks. Any laitance (a dusty residue of cement particles) can...

    CONTINUE READING

  • Digital Six Collaborator Apr 23, 2018

    How to use Garage Floor Paint Kit - For Greasy, Oily, Bare Or Painted Garage Floors

    Transform and update your garage floor in 3 easy steps. Step 1 – clean and prepare the floor Brush off any dirt and dust. The surface should be dry before applying Oil & Grease Remover. Step 2 – get ready for painting Brush on Oil & Grease Remover and leave for 5-10 minutes. Scrub with a stiff broom, or similar to remove, and rinse with clean water. Grease and oil...

    CONTINUE READING

  • Digital Six Collaborator Apr 23, 2018

    How to use Tarmac Reviver

    Prepare: The surface to be painted needs to be clean and dry, so scrape off any moss. Pressure wash if needed Apply: Load up a roller with the mixture and you’re away. Don’t flood the surface with the dressing as this will lead to a longer drying time and the possibility of an uneven finish. This will also reduce the coverage. Use a paint brush on the edges and, as...

    CONTINUE READING

  • Digital Six Collaborator Apr 23, 2018

    How to use Drive Grip - Anti Slip Paint

    Prepare The surface to be painted should be clean and dry (slightly damp is OK). Use Oil & Grease Remover if needed Paint over an existing surface coating but sand off any flaky paint first Apply The surface to be painted should be clean and dry, although a little bit of dampness isn’t a problem If there is oil, grease or other contaminants then treat it first with Oil &...

    CONTINUE READING

  • Digital Six Collaborator Apr 23, 2018

    How to use Line Marking Paint

    This product is highly flammable. Store in a cool, dry well-ventilated place Prepare: Surfaces should be clean, dry and free from any loose material Grease or oil stains should be removed with Oil & Grease Remover Apply: No need to stir the paint, and keep the lid on when not using to prevent it drying out Cleaning: Use a thinner and cleaner based on a Xylene solvent NB: This product...

    CONTINUE READING