Apr 23, 2018

Prepare:

  • Apply to concrete or tarmac. Brush the surface with a stiff broom and clean water and allow to dry before applying the product
  • Remove as much paint as possible from previously painted surfaces
  • If a concrete drive has got some deep holes in it, our Epoxy Repair Mortar is ideal
  • Use Oil & Grease Remover, if needed

 Apply:

  • Stir the contents well with a wide-bladed mixing tool
  • Apply only in dry conditions above 10°C and below 35°C
  • Do not apply in cold, damp conditions or when rain is forecast
  • In warmer conditions – 25°C-35°C – dry, hot surfaces should be slightly dampened first
  • This product should be applied in two coats. The first coat acts as a base coat, the second coat will provide the finished appearance
  • Do not apply too thickly as this can lead to the product not drying effectively
  • Apply two coats by roller, leaving 16 hours between coats. Do not apply the product in layers thicker than 2mm. Never add water to the product

Cleaning Tools
Wash tools with water before the product dries. Otherwise, soak in white spirit for 24 hours.