Rust-Oleum Chalky Floor Paint adds a classic low sheen chalk finish to wood and concrete flooring. A timeless hard wearing, water-based paint which has been designed to resist knocks and scratches and can be applied directly over old paint and varnish.

  • Water based with virtually no odour.
  • Extremely durable smooth matt finish.
  • Highly concentrated.
  • Exceptional coverage.
  • Can be applied over old paint and varnish.
  • Suitable for wooden floorboards or concrete flooring.
  • Interior use only.

The basics

You’ll need

  • Paint brush or roller

Colour Range

Chalk White, Winter Grey, Anthracite

Availability

Rust-Oleum Chalky Finish Floor Paint is supplied in 2.5L units.

 


Gallery

.

 


Instructions for use

Why

Renovate and transform the floors in your home with Rust-Oleum Chalky Finish Floor Paint. Decorative and protective, this hard-wearing water-based paint will resist knocks and scratches.

Prepare It

 For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood, previously painted or varnished surfaces should be sanded before painting. Ensure new concrete is sound, fully cured and free from laitance.

Not for use directly onto metal. Not a stain-blocking product. Prime any surfaces where stain bleed may be an issue, including knots with an appropriate stain blocking primer. If unsure, test on an inconspicuous area before painting. Not recommended for outdoor use or areas subject to regular water contact, e.g. bathrooms or areas subject to heavy wear such as garage floors. Not recommended for tiles or laminate flooring.

Apply It

Apply when temperature is between 10 and 30ºC. Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by brush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats are recommended.

Dry It

Touch dry in 1 hour. Apply a second coat after 4 hours, if necessary. Allow 24 hours before putting room back into use. Full hardness achieved after 7 days - do not wash floor during this period.

Cover It

Up to 14m² / litre. Coverage may vary depending upon method and rate of application and porosity of surface.

Clean It

Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.


What else do I need to know?

Store It

Store in a dry, safe place. Do not store paint in environments where extreme temperatures may occur. Keep within 5-30⁰C. Do not store in direct sunlight. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.

 2 years (unopened) from date of manufacture. (See base of can).

Disposal and Safety information

Please see the Material Safety Data Sheet.