Renovate and transform garden furniture with Rust-Oleum Garden Furniture Spray Paint. With an ultra durable, scrubbable, soft touch matt finish, it brings a new lease of life and colour to garden furniture. The paint can be directly applied to wood (bare or painted), brick, stone, plaster or any suitably primed rigid surface (metal, plastic etc).

  • A modern, smooth, matt finish.
  • Easy-clean.
  • Water-resistant protection.
  • Mould and algae resistant*.
  • Exceptional coverage in one coat.
  • No priming or sanding necessary on most surfaces (simply ensure surfaces are smooth, dry and free from contaminants).
  • Works great over old paint and varnish.
  • No need to wax or lacquer the finished paint work.
  • For exterior use. 

* The product contains a biocide to protect the dried film from fungal degradation.


      The basics

      You’ll need

      • A well-ventilated area

      Colour Range

      Powder Blue, Hessian, Flint, Clotted Cream, Chalk White, Bramwell, Belgrave, Anthracite

      Availability

      Rust-Oleum Garden Furniture Spray Paint is supplied in 400ml units.


      Gallery

       


      Instructions for use

      Why

      Give your garden a new lease of life with Rust-Oleum Garden Furniture Paint, the ultra durable, scrubbable, soft touch matt finish will add instant wow factor.

      Prepare it

      For best results, ensure surface is clean, dry and free from loose paint, mould & mildew, wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be lightly abraded before painting. Cover surrounding areas to protect from spray mist.

      Apply It

      Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply two light even coats. Cover surrounding areas to protect from spray mist.

      Dry It

      Touch dry in 1 hour. Handle after 4 hours. Full hardness after 16 hours.

      Cover It

      Up to 2m2  per can. Coverage may vary depending upon spray technique or roughness of surface.

      Clean It

      After use invert can and spray for 2-3 seconds to clear the spray nozzle.

       

      What else do I need to know?

      Limitations

      Cap and/or label indicate approximate colour and finish. Not for use directly onto metal. Not a stain-blocking product. Prime any surfaces where stain bleeds may be an issue, including knots. If unsure, test on an inconspicuous area before painting. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour/finish shown is for guidance only. Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90°C. Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960's paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. For further information please contact our Technical Services Department.

      Store It

      3 years (unopened) from date of manufacture. (See base of can).

      Disposal and Safety information

      Please see the Material Safety Data Sheet.