A premium quality, fast drying acrylic spray paint for use on most craft and hobby projects. Please note Metallic Elegant finish is suitable for both interior and exterior use. Metallic Brilliant finish is for interior use only.
- Bright and soft metallic sheens.
- Excellent coverage, hiding and colour retention.
- Interior and exterior use (Brilliant finishes for indoor use only).
- A well-ventilated area
White Gold – Elegant Metallic, Gun Metal – Elegant Metallic, Rose Gold – Elegant Metallic, Chrome – Brilliant Metallic, Bright Copper – Brilliant Metallic, Bright Gold – Brilliant Metallic, Copper – Elegant Metallic, Gold – Elegant Metallic, Silver – Elegant Metallic
Rust-Oleum Metallic Spray Paint is supplied in 400ml units.
Instructions for use
Rust-Oleum Metallic spray paint is perfect for creating elegant and brilliant metallic finishes.
Surfaces to be painted should be clean, dry and free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rust-Oleum Surface Primer. Cover surrounding areas to protect from over spray.
Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.
Touch dry in 20 minutes. Hard dry in 24 hours. Recoat within 1 hour or after 24 hours. Drying times are based on warm (15°C), dry application conditions with good ventilation. Lower temperatures and higher humidity will prolong the drying times. 1-2 coats recommended.
A 400ml can covers approximately 2.5m2 dependent upon surface profile / porosity.
After use invert can and spray for 2-3 seconds to clear the spray nozzle.
What else do I need to know?
Do not use Metallic Brilliant on objects that will be regularly handled. Do not use on surfaces that regularly exceed temperatures of 80°C. Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960’s paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. A copy of the appropriate Health & Safety Data Sheet should be consulted prior to using the product. For further information please contact our Technical Services Department.
3 years (unopened) from date of manufacture. (See base of can).
Disposal and Safety information
Please see the Material Safety Data Sheet.