Create an instant wow factor on craft and hobby projects with this ultra shimmer, high-density glitter spray paint. This paint can be applied to many surfaces including wood, metal, wicker, glass, ceramic, pottery, polystyrene, paper, plastic and more.
For added protection, top coat with the Rust-OIeum Glitter Ultra Shimmer Clear Protective Sealer.
- Adds a shimmering full coverage glitter finish to your projects.
- Available in three shimmering finishes, gold, silver and Rose.
- Use with Rust-OIeum Glitter Ultra Shimmer Clear Protective Sealer.
- Interior use only.
Silver, Rose, Gold, Clear Sealer
White Gold – Elegant Metallic, Gun Metal – Elegant Metallic, Rose Gold – Elegant Metallic, Chrome – Brilliant Metallic, Bright Copper – Brilliant Metallic, Bright Gold – Brilliant Metallic, Copper – Elegant Metallic, Gold – Elegant Metallic, Silver – Elegant Metallic
Rust-Oleum Ultra Glitter Spray Paint is supplied in 400ml units.
Rust-Oleum Ultra Glitter Clear Protective Sealer is supplied in 400ml units.
Instructions for use
Rust-Oleum Ultra Shimmer Glitter (Aerosol) provides a full coverage of radiant shimmer for many surfaces including wood, metal, wicker, glass, ceramic, pottery, polystyrene, paper, plastic and more. For added protection, top coat with the Rust-Oleum Ultra Shimmer Glitter Sealer. For interior use only.
Rust-Oleum Ultra Shimmer Glitter Clear Sealer provides additional protection for your Ultra Shimmer Glitter projects. The clear top coat helps prevent glitter from flaking and fading, while maintaining the glitter’s radiance. It provides protection for many surfaces including: wood, metal, wicker, glass, ceramic, pottery, polystyrene, paper, plastic and more.
Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 10°C and 32°C and humidity is below 60% to ensure proper drying. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist. Remove loose paint and rust with wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry. Use of a Rust-Oleum primer provides superior adhesion and hiding and is especially recommended for bare wood and metal.
Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Hold can upright 30cm from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart.
Times based on 21°C – 50% relative humidity. Allow more time at cooler temperatures. May recoat at any time. Dries to the touch in 20 minutes and to handle in 1 hour. Fully dry in 24 hrs.
A 400ml can covers approximately 1.6m2 dependent upon surface profile / porosity.
When finished spraying, clear spray valve by turning can upside down and pushing spray button for 5 seconds. Clean up wet paint with White Spirits. Dispose of can in accordance of local regulations. Do not burn or place in home compactor. If valve clogs, twist and pull off spray tip and rinse it in a solvent such as White Spirits. Do not stick pin or other object into the stem.
What else do I need to know?
3 years (unopened) from date of manufacture. (See base of can).
Disposal and Safety information
Please see the Material Safety Data Sheet.