Rust-Oleum Satin Furniture Paint adds a timeless mid-sheen lustre to any piece of furniture. The superior silk touch satin finish comes in an elegant palette of 18 soothing shades and has been carefully curated to enhance contemporary interiors. Apply directly to furniture in one easy application.
Rust-Oleum Satin Furniture Paint is “Certified Toy Safe”, subject to Toy Standard Testing: BS EN 71-3:2013+A3:2018 Safety of toys. Migration of certain elements.
- Water based with virtually no odour.
- Silk touch satin finish.
- Highly concentrated.
- Exceptional coverage in one coat.
- No priming or sanding necessary on most surfaces (simply ensure surfaces are smooth, dry and free from contaminants).
- Works great over old paint and varnish.
- No need to wax or lacquer the finished paint work.
- Certified Toy Safe.
- Interior use only.
- Paint brush or roller
Cotton, Slate, Shortbread, Mocha, Carbon, Mineral Grey, Graphite, Dove, Hessian, Cobalt, Strawberry Vanilla, Teal, Sage, Powder Blue
Rust-Oleum Satin Finish Furniture Paint is supplied in 750ml units.
Instructions for use
An elegant, satin paint finish for the renovation of old furniture. The paint can be used directly onto wood (bare or painted), brick, stone, plaster or any suitably primed rigid surface. No priming or sanding necessary on most surfaces.
For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting.
Not for use directly onto metal. Not a stain-blocking product. Prime any surfaces where stain bleed may be an issue, including knots with a suitable stain blocking primer. Advisable to use a primer/sealer on very porous surfaces. If unsure, test on an inconspicuous area before painting. Not recommended for outdoor use.
Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats recommended.
Touch dry in 1 hour. Handle after 4 hours. Apply a second coat after 4 hours, if necessary. Full hardness after 4 hours.
Up to 14m² / litre. Coverage may vary depending upon method and rate of application and porosity of surface.
Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
What else do I need to know?
Store in a dry, safe place. Do not store paint in environments where extreme temperatures may occur. Keep within 5- 30⁰C. Do not store in direct sunlight. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.
2 years (unopened) from date of manufacture. (See base of can).
Disposal and Safety information
Please see the Material Safety Data Sheet.