A premium quality scratch resistant finish that allows you to create an attractive faux stone finish on a wide range of substrates including wood, metal, glass and ornamental ceramics. Designed for interior decorative items only.

  • Faux stone finish.
  • Excellent coverage, hiding and colour retention.
  • Interior use only.

        The basics

        You’ll need

        • A well-ventilated area

        Colour Range

        Pebble, Bleached Stone, Black Granite

        Availability

        Rust-Oleum Stone Spray Paint is supplied in 400ml units.


        Gallery

         


        Instructions for use

        Why

        With Rust-Oleum Stone textured spray paint you can create the natural look and texture of real stone with ease. Adhesive formula provides a long-lasting decorative finish.

        Prepare it

        Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare metal should be primed with Rust-Oleum Surface Primer. Cover surrounding areas to protect from spray mist.

        Apply It

        Shake can vigorously for 2-3 minutes and continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats 1 hour apart to build up the textured effect. We recommend practicing this technique on a small test sample.

        Dry It

        Touch dry in 6 hours. Hard dry in 24 hours. Recoat within 1 hour or after 24 hours. Drying times are based on warm (15°C), dry application conditions with good ventilation. Lower temperatures and higher humidity will prolong the drying times. 1-3 light coats recommended.

        Cover It

        A 400ml can covers approximately 2m2 dependent upon surface profile / porosity.

        Clean It

        To clear spray for future use, turn can upside down and spray until clear gas is emitted.

         

        What else do I need to know?

        Limitations

        Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960’s paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. A copy of the appropriate Health & Safety Data Sheet should be consulted prior to using the product. For further information please contact our Technical Services Department. Not for use on ceramic tiles. Not for use on objects subjected to high wear or moisture.

        Store It

        3 years (unopened) from date of manufacture. (See base of can).

        Disposal and Safety information

        Please see the Material Safety Data Sheet.