A premium quality scratch resistant finish that allows you to create an attractive, tactile textured finish on a wide range of substrates including wood, metal and ornamental ceramics.

  • Multi-colour decorative paint effect.
  • Excellent coverage, hiding and colour retention.
  • Interior and exterior use.

        The basics

        You’ll need

        • A well-ventilated area

        Colour Range

        Aged Iron

        Availability

        Rust-Oleum Textured Spray Paint is supplied in 400ml units.


        Gallery

         

         

         


        Instructions for use

        Why

        Rust-Oleum Textured Spray Paint is perfect for creating an eye catching textured finish on wood and metal surfaces.

        Prepare it

        Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rust-Oleum Surface Primer. Bare plastic should be primed with Rust-Oleum Plastic Primer. Cover surrounding areas to protect from spray mist.

        Apply It

        Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply 2-4 coats to build up the textured effect.

        Dry It

        Touch dry in 20 minutes. Hard dry in 24 hours. Recoat after 30 minutes. Drying times are based on warm (15°C), dry application conditions with good ventilation. Lower temperatures and higher humidity will prolong the drying times.

        Cover It

        A 400ml can covers approximately 1.2m2 dependent upon surface profile / porosity.

        Clean It

        To clear spray for future use, turn can upside down and spray until clear gas is emitted.

         

        What else do I need to know?

        Limitations

        Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90°C. Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960's paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. A copy of the appropriate Health & Safety Data Sheet should be consulted prior to using the product. For further information please contact our Technical Services Department.

        Store It

        3 years (unopened) from date of manufacture. (See base of can).

        Disposal and Safety information

        Please see the Material Safety Data Sheet.