Rust-Oleum Universal is a premium all surface paint that provides the ultimate long-lasting protection and durability. The breakthrough formulation delivers exceptional coverage on plastic, wood, metal, concrete, wicker, aluminium and masonry surfaces. It features an advanced spray system that allows you to spray at any angle, even upside down for those hard to reach areas. Stops rust. Paint & primer in one.

  • The world’s first all-surface decorative spray paint.
  • 360° any-angle spray with unique comfort grip.
  • Maximum adhesion for demanding substrates.
  • Fade and chip resistant.
  • Rust preventative.
  • Interior and exterior use.


        The basics

        You’ll need

        • A well-ventilated area

        Colour Range

        Black – Matt, Black – Satin, Black – Gloss, White – Matt, White – Satin, White – Gloss, Titanium Silver – Metallic, Pure Gold – Metallic, Aged Copper – Metallic, Oil Rubbed Bronze – Metallic, Satin Nickel – Metallic, Copper – Hammered


        Rust-Oleum Universal All Surface Spray Paint is supplied in 400ml units.





        Instructions for use


        Universal is the world’s first all-surface spray paint. Its ergonomic comfort grip houses a unique trigger mechanism which delivers an advanced spray system that can dispense paint at any angle – even upside down!

        Prepare it

        Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Cover surrounding areas to protect from spray mist.

        Apply It

        Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.

        Dry It

        Touch dry in 30 minutes. Hard dry in 24 hours.

        Recoat within 1 hour or after 24 hours. 1-2 coats recommended.

        Cover It

        A 400ml can covers approximately 2m2 dependent upon surface profile / porosity.

        Clean It

        Wipe wet paint from nozzle with white spirit.


        What else do I need to know?


        Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90°C. Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960's paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. A copy of the appropriate Health & Safety should be consulted prior to use. For further information please contact our Technical Services Department.

        Store It

        3 years (unopened) from date of manufacture. (See base of can).

        Disposal and Safety information

        Please see the Material Safety Data Sheet.