Painter’s Touch is a range of multi-purpose decorative and protective aerosol spray paints ideal for everyday projects.

  • High quality, fast-drying formulation.
  • Smooth, durable finish.
  • Interior and exterior use.

    The basics

    You’ll need

    • A well-ventilated area

    Colour Range

    Black – Matt, Black – Satin, Black – Gloss, White – Matt, White – Satin, White – Gloss, Dark Grey – Gloss, Cherry Red – Gloss, Winter Grey – Gloss, Heirloom White – Satin, Stone Grey – Satin, Espresso – Satin

    Availability

    Rust-Oleum Painter’s Touch is supplied in 400ml units.

     


    Gallery

     

     


    Instructions for use

    Why

    Premium quality multi-purpose paint for use on virtually any paintable surface.

    Prepare it

    Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rust-Oleum Surface Primer. Bare plastic should be primed with Rust-Oleum Plastic Primer. Cover surrounding areas to protect from spray mist.

    Apply It

    Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.

    Dry It

    Touch dry in 20 minutes. Hard dry in 24 hours. Recoat within 1 hour or after 24 hours. Drying times are based on warm (15°C), dry application conditions with good ventilation. Lower temperatures and higher humidity will prolong the drying times.

    Cover It

    A 400ml can covers approximately 2m2 per coat dependent upon surface profile / porosity.

    Clean It

    After use invert can and spray for 2-3 seconds to clear the spray nozzle.

     

    What else do I need to know?

    Limitations

    Do not use on galvanised steel or surfaces that regularly exceed temperatures over 90°C. Apply only when temperature is between 10-32°C and relative humidity below 85%. Special precautions should be taken during the surface preparation of pre 1960's paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. A copy of the appropriate Health & Safety Data Sheet should be consulted prior to using the product. For further information please contact our Technical Services Department.

    Store It

    3 years (unopened) from date of manufacture. (See base of can).

    Disposal and Safety information

    Please see the Material Safety Data Sheet.