• Digital Six Collaborator Apr 18, 2018

    How to use Seal 'N' Tint

    Prepare: Ensure the surface to be treated is clean, dry and free from algae and moss. A good sweep with a stiff broom removes most things, but a fungicide may be necessary on heavier growths Oil & Grease Remover will get rid of residue from cars, garden tools and barbecues Apply: Making sure the lid is on tight, give the tin a good shake. Apply in dry, warm (above 10°C)...

    CONTINUE READING

  • Digital Six Collaborator Apr 18, 2018

    How to use Block Paving Sealer

    Prepare: Ensure that the surface to be worked on is clean, dry and free from dirt, dust, grease and other contaminants. If you are washing the area first then allow it to dry thoroughly before applying Block Paving Sealer. If you have moss, algae or other fungi then it should be treated with a suitable algicide or fungicide. If there has been some sand loss, top up the joints between...

    CONTINUE READING

  • Digital Six Collaborator Apr 18, 2018

    How to use Garage Floor Paint

    Transform and update your garage floor in 3 easy steps. Step 1 – clean and prepare the floor Make sure the floor is clean and dry before applying the etchant. Just give it a good scrub with a stiff broom. Then, apply the Concrete Etchant evenly. We suggest using a plastic watering can with a rose spout. Wait about 15 minutes, for the frothing to stop and then flush the...

    CONTINUE READING

  • Digital Six Collaborator Apr 15, 2018

    How to use Firmtread Anti Slip Deck Coat and Cleaner

    Deck Clean Prepare Before you apply Deck Clean, give the area to be treated a good brushing. Scrape off any heavy stains Apply Dilute one part of Deck Clean with two parts water for general cleaning. Use neat on stubborn stains Deck Clean can be applied with a brush or from a watering can with a rose spout Leave the mixture to work for about 5 minutes and give the...

    CONTINUE READING