Firmtread Anti-Slip Deck Strips
Free Gift

£14.95

Out of stock

We all know how slippery decking can become. Screw these non-slip strips to the deck to avoid nasty slips and trips. They are weatherproof fibreglass and will last longer than the decking.

Colour
Width

SEND A MESSAGE

Description

Here’s what you need to know:

  • Easy to fit – simply screw them to the deck boards. We supply the screws and pre-drill the holes for you
  • At only 3mm thick, with chamfered edges, Firmtread Anti-Slip Deck Strips are unobtrusive yet effective
  • Available in two widths to fit most deck boards

How to Use

Prepare:

  • The decking to which you fix the strips should be clean, dry and free from debris

Apply:

  • To cut the strips to size power tools are best. However, a jigsaw, hacksaw or abrasive disc will do the job too, but will need more elbow grease
  • Lay the strips on the deck in the way you would like them to be fixed, so you can see how they fit and where to cut them.
  • To fix to the deck boards we supply 8x30mm zinc plated or stainless steel screws to fit into the pre-drilled holes. We recommend a #10 drill and a #8 screw as the wood contracts and expands slightly. If you need to add extra screws, please follow these settings
  • One row of screw holes are pre-drilled in the 50mm and 90mm wide strips, holes are 50mm from each end

Technical Specification

Primer required:                              

No

Use on:      

Outdoor wooden decking

Properties:

Easy-fit anti-slip GRP (fibreglass) strips

Length:

1200mm, cut to size with a hacksaw

Width:

50 or 90mm

 

Help and Advice

Need a few things clearing up? Check out our Help and Advice section.

VIEW HELP & ADVICE ›

Questions and Answers

We'll answer any questions or queries you have.

VIEW Q&A ›