Garage Floor Seal Kit - For greasy, oily, bare garage floors
Out of stock
Improving that dusty garage floor couldn’t be easier with our Garage Floor Seal Kit. Includes Garage Floor Sealer, Oil & Grease Remover, 2 x Paint Brushes, Roller and Roller Tray, Replacement Roller and Telescopic Handle!
Dry time 12 hours
covers 40m² per 5L
Glossy appearance
Two coats
Money Back Guarantee
Description
Everything you need to easily seal your garage floor. Includes Garage Floor Sealer, Oil & Grease Remover, 2 x Paint Brushes, Roller and Roller Tray, Replacement Roller and Telescopic Handle!
Sealing your garage floor makes it dustproof and much simpler to clean.
Our Kit contains all the tools you need to get the job done and the Garage Floor Sealer. Each Kit contains enough for two coats of sealer on a Garage floor measuring approximately 15m2. For the double kit, this will cover 30m2.
Single Garage (15m2) kit
- 5L Garage Floor Sealer
- 5” paint brush, 2”paint brush, 9” paint roller and tray, replacement roller and telescopic handle
- 2 x 2.5L Oil & Grease Remover
Double Garage (30m2) kit
- 5L Garage Floor Sealer x2
- 5” paint brush, 2”paint brush, 9” paint roller and tray, replacement roller and telescopic handle
- 4 x 2.5L Oil & Grease Remover
Useful Information
Garage Floor Sealer Product Information Sheet
Garage Floor Sealer Safety Data Sheet
Oil & Grease Remover Product Information Sheet
Oil & Grease Remover Safety Data Sheet
Technical Specification
|
Appearance: |
Glossy |
|
Use where: |
Indoors and outdoors |
|
Use on: |
Concrete floor |
|
Properties: |
Hardens, seals and dust proofs concrete floors |
|
Covers: |
40m² per 5L |
|
Drying time: |
12 hours at 15°C |
|
Don’t use at temperatures below: |
10°C |
|
Number of coats: |
2 |
QUESTIONS & ANSWERS
Ask a Question-
A: We would recommend leaving it be completely touch dry, it should be applied in reasonable temperatures also. So in this case 24 hours would be fine, though not longer than 7 days after the first application.
Applying a second coat within this window would give it the best chance of adhering to the previous layer and the layer being dry enough to take it.
You might also need:
