Drive Fix - Asphalt Crack Filler - 2.5L

£19.95

Availability Out of stock

If your asphalt or tarmac has a crack, then you need Drive Fix to stop water getting in and turning a little crack into a big pothole.

Dry time 2-4 hours (5mm wide), 6-10 hours (20mm wide)

Covers approx. 100m of 3mm wide crack

Perfect for cracked asphalt, tarmac and concrete surfaces

Money Back Guarantee

Coverage Calculator Coverage Calculator

Do you know the size of the area?

Area M² Recommended Coats Calculate

Tins

Description

Here’s what you need to know:

Once water and ice get into a little crack it can become a pothole. Repair the crack quickly and cost effectively with Drive Fix - Asphalt Crack Filler
To apply, all you need to do is to pour the rubberised bitumen mixture into a spouted can, pour into the cracked asphalt and that’s it

Features and benefits:

Strong enough to drive a car over
Sets in as little as 2-4 hours depending on the size of the crack and the temperature
Stops a small problem turning into a big one
Long lasting, hard wearing, yet so easy to apply
After it has set, apply Tarmac Reviver for that ‘new drive’ look
Outdoor use only

Primer required:	No
Use where:	Outdoors
Use on:	Cracked asphalt, tarmac and concrete surfaces
Properties:	Blocks water from penetrating tarmac. Flexible and long lasting. Overcoat if required
Don’t use at temperatures below:	5°C
Drying time:	2-4 hours up to 5mm wide, or 6-10 hours up to 20mm
Covers:	Approx. 100m of 3mm wide crack

A: Drive Fix is very easy to use. Just pour straight in to cracks up to 3mm from a spouted can, or for cracks between 3 and 25mm mix 50:50 with dry sand, pour in and flatten.
A: This can only be used at temperatures above 5 degrees so we would not reccomend using in winter.
A: This is made of rubberised bitumen which is another word for asphalt. To prepare the crack just remove any loose asphalt and dirt from inside it.
A: This is suitable for use on cracks up to 25mm. For cracks up to 3mm wide the mixture can be poured straight in from a spouted can. For larger cracks up to 25mm it should be mixed 50:50 with dry sand for a better finish.
A: For cracks up to 5mm wide Drive Fix will be ready to driver over after 2-4 hours, and cracks up to 25mm 6-10 hours at 15-20 degrees celcuis. For lower temperateres above 5 degrees this time will be increased and we would recommend leaving for 24 hours.
A: Yes, this product would be suitable for your project.