Firmtread Anti-Slip Deck Strips
Free Gift


Out of stock

We all know how slippery decking can become. Screw these non-slip strips to the deck to avoid nasty slips and trips. They are weatherproof fibreglass and will last longer than the decking.




Here’s what you need to know:

  • Easy to fit – simply screw them to the deck boards. We supply the screws and pre-drill the holes for you
  • At only 3mm thick, with chamfered edges, Firmtread Anti-Slip Deck Strips are unobtrusive yet effective
  • Available in two widths to fit most deck boards

How to Use


  • The decking to which you fix the strips should be clean, dry and free from debris


  • To cut the strips to size power tools are best. However, a jigsaw, hacksaw or abrasive disc will do the job too, but will need more elbow grease
  • Lay the strips on the deck in the way you would like them to be fixed, so you can see how they fit and where to cut them.
  • To fix to the deck boards we supply 8x30mm zinc plated or stainless steel screws to fit into the pre-drilled holes. We recommend a #10 drill and a #8 screw as the wood contracts and expands slightly. If you need to add extra screws, please follow these settings
  • One row of screw holes are pre-drilled in the 50mm and 90mm wide strips, holes are 50mm from each end

Technical Specification

Primer required:                              


Use on:      

Outdoor wooden decking


Easy-fit anti-slip GRP (fibreglass) strips


1200mm, cut to size with a hacksaw


50 or 90mm



Have a Question?

Be the first to ask a question about this.

Ask a Question