Firmtread Anti Slip Self Adhesive Tape
Free Gift

£19.95

Out of stock

There is no easier way to stop slips and trips in your home than with an anti slip tape that highlights a hazard

Colour

SEND A MESSAGE

Description

As with many products in our range, these tapes were originally developed for industrial use but are also useful in and around the home. They’re most popularly used on back steps, on slopes or in the garage.

You can use them inside or out, on concrete, tiles, timber, brick, stone or metal. They are so easy to fit because they are self adhesive - simply cut off the length you need.

The tapes come in a choice of colours - black, yellow and clear depending on where you want to apply them. You may want them to stand out or you may want them to blend in (such as on tiles) - the choice is yours. 

Lengths and widths:

  • 10m x 50mm (black and yellow) 
  • 5m x 50mm (clear) 

Seal the tape with Firmtread Tapes Edge Sealer to stop water from getting underneath, causing the tape to lift.

Technical Specification

Appearance:

Finely textured black, yellow or clear surface

Primer required:

No. Unless the surface is dusty and gritty, in which case seal with a paint or varnish

Use where:

Indoors and outdoors

Use on:

Concrete, metal, stone, painted or varnished wood. Floors, ramps, walkways and paths

Properties:

Tough base a hard wearing anti slip aluminium oxide aggregate

Curing time:

Can be walked on immediately. Fully set in 24 hours

Min application temperature:

Do not apply outside at 10°C or lower

 

Help and Advice

Need a few things clearing up? Check out our Help and Advice section.

VIEW HELP & ADVICE ›

Questions and Answers

We'll answer any questions or queries you have.

VIEW Q&A ›